Table of contents for Magnesium : proceedings of the 7th International Conference Magnesium Alloys and their Applications / edited by K.U. Kainer.

Bibliographic record and links to related information available from the Library of Congress catalog

Information from electronic data provided by the publisher. May be incomplete or contain other coding.

Alloy Development.
The Viability of Mg Alloy with Nano/Sub-micron Structure as a new Material for Practical Applications (E. Aghion, A. Arnon).
A Comparative Study of Carbon Additives on Grain Refinement of Magnesium Alloys (P. Cao, Ma Qian, K. Kondoh, D.H. St.John).
Advanced Gravity Casting Magnesium Alloys for the Aircraft Industry (B. Bronfin, N. Moscovitch, A. Ben-Dov, J. Townsend, S. Mahmood, J. Vainola, S. Deveneyi).
Elektron 21 – An Aerospace Magnesium Alloy for Sand Cast & Investment Cast Applications (P. Lyon, I. Syed, S. Heaney).
Microstructures and Mechanical Properties of Mg-Zn-Al Alloys Produced by High Pressure Die Casting and Sand Casting (J.F. Nie, M. Easton, T.B. Abbott).
Phase Formation in Mg-Sn Alloys Modified by Ca and Ce (J. Gröbner,A. Kozlov, M. Hampl, R. Schmid-Fetzer).
Microstructure and Micromechanical Properties of as-cast Mg-Sn-Ca and Mg-Sn-Mn Alloys (J. Burši;k, Y. Jirásková, V. Burši;ková, T. Abu Leil, C. Blawert, W. Dietzel, N. Hort, K.U. Kainer).
Microstructure and High Temperature Mechanical Properties of Mg-Al-Sn Alloys (Yeon Jun Chung, Kwang Seon Shin, Woo Chul Cho).
Effect of Heat-Treatment on the Microstructure, Microhardness and Corrosion of Cast Mg-3Sn-2Ca Alloy (J. Burši;k, K. Zábranský, Y. Jirásková, V. Burši;ková, T. Abu Leil, C. Blawert, Y. Huang, W. Dietzel, N. Hort, K. U. Kainer, K.P. Rao).
Elevated Temperature Alloys – Paths for Further Performance Gains in AE44 (P. Bakke, A.L. Bowles, H. Westengen).
Phase Composition and Creep Behavior of Mg-Rare Earth-Mn Alloys with Zn Addition (B. Smola, I. Stuli;ková, J. Pelcová, N. Zaludová).
Investigation of Mg-Al-Sr Phase Equilibria (A. Janz, J. Gröbner, D. Mirković, R. Schmid-Fetzer, M. Medraj, Zhu Jun, Y.A. Chang).
Hot Chamber Die-Casting of Magnesium Alloys (R. Cibis, A. Kiełbus).
Microstructural characterization of Mg-Al-Sr alloy (T. Rzychoń, A. Kiełbus, R. Cibis).
A new Look at the Mg-Al-Zn Family – Focus on Tailoring Properties through Composition Control (A.L. Bowles, P. Bakke, H. Westengen).
Mg-4Al-4RE Alloy for Die-Casting (T. Rzychoń, A. Kiełbus, R. Cibis).
Effective Alloy Development using Thixomolding Focussing on Improved Creep Strength of AZ91 (H. Eibisch, A. Lohmüller, M. Scharrer, R.F. Singer).
Microstructures and Mechanical Properties of Extruded AZ31 Mg Alloy Processed by Roll-compaction Process (K. Kawabata, H. Oginuma, K. Kondoh).
Microstructural Evolution of Mg-Al-Ca-Sn Alloy during Extrusion (J. Dzwonczyk, M.A. Leeflang, J. Zhou, J. Duszczyk).
Microstructure and Mechanical Properties of Strip Cast Mg-Zn-Al Alloys with Ca by Twin Roll Caster (K. Matsuzaki, K. Hatsukano, M. Kato, K. Hanada, T. Shimizu, Y. Murakoshi).
Production of Mg-Ni Alloys under High Pressure and High Temperature for use as Catalysts in Diamond Synthesis (A. J. Sideris, G.S. Bobrovnitchii).
Investigation of Structure and Properties of the Age-Hardenable Mg-Sm Alloys after Sever Plastic Deformation (L.L. Rokhlin, T.V. Dobatkina, N.I. Nikitina, V.N. Timofeev, S.V. Dobatkin, M.V. Popov).
Simulation and Modelling.
Yielding of Magnesium: from Single Crystal to Structural Behaviour (S. Graff, D. Steglich, W. Brocks).
Microstructure Formation in Magnesium Alloys Investigated by Phase-Field Simulation (J. Eiken, I. Steinbach, B. Böttger).
Effects of Calcium on Texture Evolution and Plastic Anisotropy of the Magnesium Alloy AZ31 (T. Ebeling, Ch. Hartig, R. Bormann, J. Bohlen, D. Letzig).
Modeling Microstructure and Mechanical Properties of thin-walled Magnesium Castings (K. Weiss, A. Wendt, Ch. Honsel, G. Arruebarrena, I. Hurtado, J. Va;inöla;, S. Mahmood, J. Townsend, A. Ben-Dov, A. Schröder, A. Pinkernelle).
Casting and Recycling Melting.
Advancements in High Pressure Die Casting of Magnesium (H. Westengen, H. Gjestland).
A New Analytical Methodology for the Assessment of Grain Refinement in Magnesium Alloys (D. H. StJohn, Peng Cao, Ma Qian, M. A. Easton).
Creation of Fine and Spherical Magnesium Crystals via Control of Nucleation and Growth Instabilities (Ma Qian).
The Role of Fluorine Solubility in the Protection of Molten Magnesium (M. Syvertsen, G. Tranell, K. Aarstad, T.A. Engh).
Reduction and Avoidance of Ecologically Harmful Cover Gases for Handling Molten Magnesium (Fr.-W. Bach, M. Schaper, M. Hepke, A. Karger, J. Werner).
Ceramic Foam Filtration of Magnesium Alloy Melt (Bong Sun You, Chang Dong Yim, G.H. Wu).
Development of an Investment-Casting Process of Mg-Alloys for Aerospace Applications (G. Arruebarrena, I. Hurtado, J. Va;inöla;, S. De;ve;nyi, J. Townsend, S. Mahmood, A. Wendt, K. Weiss, A. Ben-Dov, A. Schröder, A. Pinkernelle).
Evaluation of the Hot Tearing Susceptibility of Selected Magnesium Casting Alloys in Permanent Molds (J.P. Thomson, M. Sadayappan, M. Sahoo, D.J. Weiss).
Temperature Dependence of the Viscosity of Magnesium Alloy AZ91D with Additions of Calcium in Liquid State and Effect of Thermal Treatment of these Melts on the Structure that Forms after their Crystallization (I. S. Abaturov, P. S. Popel, I. G. Brodova, V. V. Astafiev, Peijie Li).
Advances in Magnesium Injection Molding (Thixomolding) (M. Scharrer, A. Lohmüller, R. M. Hilbinger, H. Eibisch, R. Jenning, M. Hartmann, R. F. Singer).
Microstructure and Mechanical Properties of Rheo-diecast Mg-alloys (S. Liu, G. Ji, Y. Wang, Z. Fan).
Development of an AM50 Based Magnesium Recycling Alloy (D. Fechner, C. Blawert, P. Maier, K. U. Kainer, N. Hort).
The Properties of Magnesium Alloy Strip Produced by Melt Drag Process (M. Motomura, S. Nishida).
Experimental and Numerical Investigation of Texture Development During Hot Rolling of Magnesium Alloys (R. Kawalla, C. Schmidt, H. Riedel, A. Prakash).
Basic Research in the Contacting Condition between the Molten Magnesium Alloy and the Roll on the Melt Drag Process (Mitsugu Motomura, Takeshi Yamazaki, Yoshitaka Ando, Yuki Takano, Shinichi Nishida).
Method for Horizontal Continuous Casting of Magnesium Alloy Slab (K. Tada).
Wrought Alloys.
Development and Application of Wrought Magnesium Alloys in China (Fusheng Pan, Aitao Tang, Siyuan Long, Mingbo Yang).
Wrought Mg Alloy for Civil Aircraft Application – A Process Chain Approach (M. Kettner, U. Noster, H. Kilian, R. Gradinger, W. Kühlein, A. Drevenstedt, F. Stadler, E. Ladstaetter, A. Lutz).
The Dynamic Recrystallization of Commercially Pure Mg and Three Mg-Y Alloys (R. Cottam, J. Robson, G. Lorimer, B. Davis).
Data Correction for Constitutive Analysis of Wrought Magnesium Alloys Based on Compression Tests (F.A. Slooff, J.P. Boomsma, J. Zhou, J. Duszczyk, L. Katgerman).
Change in Formability of AZ31 and AZ61 from Room to Elevated Temperatures (H. Takuda, H. Fujimoto, T. Hama, Y. Sakurada).
Examination of the Forming Properties of Magnesium Wrought Alloys MRI 301F and AZ80A (A. Löffler, S. Schumann, K. U. Kainer, B. Bronfin).
Die Forging of Commercial and Modified Magnesium Alloys (J. Swiostek, C. Blawert, D. Letzig, K. U. Kainer, J. Bober, W. Hintze).
Die-Forged Disks for Automobile Wheels in Magnesium Alloys (B. V. Ovsyannikov).
A Study on the Microstructure of Strip Cast Magnesium (H. Palkowski, P.M. Rucki, H.-G. Brokmeier, S.-B. Yi).
Properties of Strips and Sheets of Magnesium Alloy Produced by Casting-Rolling Technology (R. Kawalla, M. Ullmann, M. Oswald, C. Schmidt).
Single Pass Large Draught Rolling of Some Magnesium Alloys below 473K by High Speed Rolling (T. Sakai, H. Utsunomiya, S. Minamiguchi, H. Koh).
Evaluation of Forming Behaviour and Tribological Properties of Magnesium Sheet-metal Directly Rolled From Semi-continuously Casted Feedstock (B. Viehweger, M. Düring, A. Karabet, H. Hartmann, U. Richter, G. Pieper, F. Newiak).
Investigations on Formability and Tribology of Magnesium Sheets with Regard
to Warm Forming Processes (J. Hecht, M. Merklein, M. Geiger, A. Stich).
Superplastic Forming of Magnesium Alloys: Composition and Microstructure Effects (R. Boissière, J.J. Blandin).
On the Superplastic Forming of the AZ31 Magnesium Alloy (F. Abu-Farha, M. Khraisheh).
Extrusion of Different AZ Magnesium Alloys (S. Mueller, K. Mueller, T. Huichang, P. Wolter, W. Reimers).
Effect of billet temperature and ram speed on the behavior of AZ31 during extrusion (M.A. Leeflang, J. Zhou, J. Duszczyk).
Influence of Extrusion Conditions on the Superplastic Properties of a Mg-8%Li Alloy Processed at Room Temperature by Equal-Channel Angular Pressing (M. Furui, H. Kitamura, H. Anada, T.G. Langdon).
Severe Plastic Deformation of AZ31 (S. Mueller, K. Mueller, W. Reimers).
Production and Properties of Small Tubes Made from MgCa0,8 for Application as Stent in Biomedical Science (Th. Hassel, Fr.-W. Bach, A.N. Golovko).
Microstructural Evolution.
The Effect of Zinc and Gadolinium on the Precipitation Sequence and Quench Sensitivity of Four Mg-Nd-Gd alloys (L.R. Gill, G. W. Lorimer, P. Lyon).
Secondary Precipitation in the Magnesium Alloy WE54 (Yuchang Su, B. M. Gable, B. C. Muddle, J.-F. Nie).
Influence of Production Technology and Heat Treatment on the Precipitation Processes in Mg-Y-Nd-Zn-Zr Alloy (J. Pelcová, B. Smola, I. Stuli;ková).
Microstructure of Elektron 21 Magnesium Alloy After Heat treatment (A. Kielbus).
Structural Evolution on Thermal Treatments of EV31 Alloy (M. Massazza, G. Riontino, D. Lussana, A. Iozzia, P. Mengucci, G. Barucca, A. Di Cristoforo§, R. Ferragut, R. Doglione).
Microstructural Stability of Magnesium Alloys for Aerospace Applications (S. Avraham, M. Bamberger, B. Bronfin, G. Arruebarena).
The Refinement of Precipitate Distributions in an Age Hardenable Mg-Sn Alloy Through Microalloying (C. L. Mendis, C. R. R. Hutchinson, C. J. Bettles, M. A. Gibson, S. Gorsse).
Microstructural Evolution and Phase Formation in Novel Mg-Zn Based Alloys (B. Rashkova, G. Dehm, J. Kecke;s, G. Levi, A. Gorny, M. Bamberger).
Zirconium - rich Coring Structure in WE54 Alloy after Heat Treatment (A. Kiełbus).
Microstructural Characterization of Die Cast Mg-Al-Sr (AJ) Alloy (M. Kunst, A. Fischersworring-Bunk, C. Liebscher, U. Glatzel, G. l’Esperance, P. Plamondon, E. Baril, P. Labelle).
Procedure of Quantitative Description of Mg-Al Alloy Structure After Heat Treatment (J. Adamiec, A. Kiełbus, J. Cwajna, J. Paśko).
The Evolution of Dislocation Structure as a Function of Deformation Temperature in UFG Magnesium Determined by X-ray Diffraction (T. Fabián, Z. Trojanová, R. Ku_el).
Microstructure and Thermal Stability of Ultra Fine Grained Mg-4Tb-2Nd Alloy Prepared by High Pressure Torsion (J. Cizek, I. Prochazka, B. Smola, I. Stulikova, M. Vlach, R. K. Islamgaliev, O. Kulyasova).
Amorphous Precipitates Sandwiched by Long Period Stacking Structures in the Melt-quenched Mg98Cu1R1 (R=Y and Gd) (K. Konno, M. Matsuura, M. Yoshida, M. Nishijima, K. Hiraga).
Texture Development in Different Routes ECAP Processed Mg-Si Alloys by Neutron Diffraction (Mingyi Zheng, Xiaoguang Qiao, Shiwei Xu, Xiaoshi Hu, Kun Wu, Weimin Gan, A. Schreyer, K. U. Kainer, H.-G. Brokmeier, B. Schwebke).
Effect of Ca Addition on the Microstructure Evolution of AZ31 Alloy during Thermomechanical Processing (E. Essadiqui, Jian Li, C. Galvani, P. Liu, F. Zarandi, S. Yue).
Flow Instabilities of Mg-Al4-Zn1 Alloy during High Strain-rate Deformation (J. Dzwonczyk, F. Slooff, J. Zhou, J. Duszczyk).
Microstructure and Mechanical Properties of Rolled Magnesium Sheets for Deep-drawing Applications (Fr.-W. Bach, M. Hepke, M. Rodman, A. Rossberg).
The Influence of Strain Path on Texture Evolution in Magnesium Alloy AZ31 (T. Al-Samman, G. Gottstein).
Microstructural Evolution by Hot-Working of Extruded and Continuously Casted Mg-Wrought-Alloys AZ31 and AZ80 (B. Viehweger, M. Düring, L. Schaeffer).
Mechanical Properties.
Ductile Failure of Magnesium AZ31: Twinning when the c-axis is Compressed (M. R. Barnett).
Dynamic Strain Ageing in Magnesium Alloys (P. Lukáč, Z. Trojanová).
Behaviors of High Temperature Deformation and Texture Development of AZ31 and AZ61 under Uniaxial Compression (L. Helis, K. Okayasu, H. Fukutomi).
Slip during Tension Testing of Mg-3Al-1Zn Sheet (Z. Keshavarz, M.R. Barnett).
Microstructure and Deformation Behaviour of Mg-4Li Alloy (Z. Drozd, Z. Trojanová).
Method or Determination of Specific Damping Capacity Based on Relaxation Oscillations of Cantilever Beam in Magnesium Alloys (B. Landkof A. Kotler, H. Abramovich).
Acoustic Emission Study of the Mechanical Anisotropy of AZ31 Magnesium Alloy Sheet (P. Dobroň, F. Chmeli;k, P. Lukáč, J. Bohlen, D. Letzig, K. U. Kainer).
Surface Rolling on the High-Strength Wrought Magnesium Alloy AZ80 (P. Zhang, J. Lindemann, C. Leyens).
Rolling of AM50 Magnesium Cast Alloy (J. Göken, K. Steinhoff, I. Stuli;ková, B. Smola, N. Hort, V. Očenášek).
Static and Dynamic Dent Resistance of AZ31 Magnesium Alloy Sheet (J. Kaneko, M. Sugamata, E. Yukutake).
Elaboration and Mechanical Behaviour of a Mg-based Bulk Metallic Glass (S. Puech, J. J. Blandin, J. L. Soubeyroux).
Fracture Toughness Behavior of Pressure Die Cast Magnesium Alloys Under Static and Impact Loading (G. Dietze, D. Regener).
Influence of the Microstructure and Local Mechanical Properties of Magnesium Die Cast Components Made of MgAl6Mn on the Quality of Numerical Simulations (E. Lieven, R. Koch, W. Böhme, S. Schwarz).
Effect of Anodized Layer on Fatigue Behavior of AM60 Magnesium Alloy (Y. Miyashita, S. A. Khan, Y. Mutoh, T. Koike).
Structural Durability of MRI 153M Die-Cast Components (A. Esderts, P. David, C. Berger, M. Gugau, T. Troßmann, J. Grimm).
Fatigue Crack Propagation Behavior of Mg-Al-Zn Alloys (E. H. Han, W. Ke, W. Dietzel, K. U. Kainer, R. C. Zeng).
Microstructure-based Characterization of the Cyclic Deformation Behavior of the Magnesium Die-cast Alloys MRI 153M and MRI 230D (B. Ebel-Wolf, F. Walther, D. Eifler).
Tensile-Compressive Creep Asymmetry of Die Cast Magnesium Alloys AM50, AE44 and AJ62A (S. Xu, M.A. Gharghouri, M. Sahoo).
Mechanical Strength and Creep Properties of Heat Treated AZ Alloys (S. Mueller, B. Camin, W. Reimers).
Creep Behavior of Squeeze Cast and T5 Heat Treated Mg4Y2Nd1Sc1Mn (F. Hnilica, V. Očenášek, B. Smola, I. Stuli;ková).
Influence of Specimen Orientation on Creep of Mg-10 vol.% Ti PM-Composite (F. Dobeš, K. Milička, P. Perez, G. Garces, G. Garces).
Effect of Finely Dispersed Particles on Mechanical Properties of Magnesium Alloys (S. Mizuno, Y. Tamura, H. Tamehiro, K. Funami, M. Takaya).
Corrosion and Surface Treatment.
Advances in the Active Environment Impact on the Viscoelastic Behavior of Magnesium Alloys (Y. B. Unigovski, E. M. Gutman, Z. Koren).
Evaluation of Mg SCC Using LIST and SSRT (N. Winzer, G. Song, A. Atrens, W. Dietzel, C. Blawert, K. U. Kainer).
Corrosion Behaviour of Magnesium Alloys: Material Specific Corrosion Testing (S. Bender, E. Boese, A. Heyn, J. Goellner).
Corrosion-Fatigue of AZ31 Wrought Magnesium Weldments (C.E. Cross, P. Xu, G. Ben-Hamu, D. Eliezer).
Investigation of the Corrosion of Welded Magnesium Joints (C. Berger, K. Eppel, J. Ellermeier, T. Troßmann, U. Dilthey, H. Masny, K. Woeste).
Effect of Salt Spray Corrosion on the Tensile Behavior of Wrought Magnesium Alloy AZ31 (Sp.G. Pantelakis, N.D. Alexopoulos, A.N. Chamos).
Characterization of Corrosion Interfaces in Extruded Mg-Al-Zn Alloys (I. Apachitei, F. Andreatta, L. E. Fratila-Apachitei, J. Dzwonczyk, A. Berkani, J. Duszczyk).
Influence of the Casting Method on Microstructure and Corrosion of AZ91 and AM50 (D. Zander, C. Pieper, U. Köster).
Effect of Second Phase on Corrosion Behavior of AZ31-xCa Magnesium Alloys (Chang Dong Yim, Young Min Kim, Bong Sun You, Rang Su Jang, Su Geun Lim).
The Role of Si and Ca in New Wrought Mg-Zn-Mn Based Alloys (G. Ben-Hamu, D. Eliezer, K. S. Shin).
Corrosion Behavior of Die-Cast MRI 153M and AZ91D Alloys in Alkaline and Neutral Chloride Media (S. Amira, D. Dube;, R.A. Tremblay, E. Ghali).
Study of the Corrosion Behaviour of New Mg Based Alloys (C. Juers, C.-E. Barchiche, E. Rocca, J. Hazan, J. Steinmetz).
Influence of the Alloy Composition on the Mechanical and Electrochemical Properties of Binary Mg – Ca – Alloys and its Corrosion Behaviour in Solutions at Different Chloride Concentrations (T. Hassel, F.-W. Bach, C. Krause).
Study on Chloridic Corrosion of Two Magnesium Alloys WE43 and WE54 (R.A. Khosroshahi, N. Parvini Ahmadi, A. Torabadi).
Investigation of the Passivation Behavior of Magnesium Alloys by Means of Cyclic Current-Potential-Curves (T. Troßmann, K. Eppel, M. Gugau, C. Berger).
Corrosion Resistance of an Electrodeposited Magnesium Layer from Grignard Reagents on Carbon Steel in Aqueous Chloride Media (S. Ben Hassen, E. Triki, L. Bousselmi, M. Razrazi, P. Berçot).
Comparative Corrosion And Electrochemical Properties Of Mg-Ni And Mg-Cu Alloy Systems After Cathodic Polarization (V. Shvets, V. Lavrenko, V. Talash, T. Khomko).
The Role of Biological Environments on Magnesium Alloys as Biomaterials (A. Eliezer, F. Witte).
Nanoparticle-based Inorganic Coatings for the Corrosion Protection of Magnesium Alloys (W. Fürbeth, F. Feil, M. Schütze).
Composite Coatings – The Newest Surface Treatment Technology For Magnesium (I. Ostrovsky).
Coating and Surface Treatment of Magnesium-Based Alloys and Composites (V. Neubert, A. Bakkar, Ching-An Huang).
Anodizing of Magnesium Alloys (A. Berkani, P. Skeldon, G.E. Thompson, L.E. Fratila-Apachitei, I. Apachitei, J. Duszczyk).
Corrosion Resistance of Plasma-Anodized AZ91D Alloy: Effect of Additive (C.-E. Barchiche, C. Juers, E. Rocca, J. Hazan, J. Steinmetz).
Electroplating Processes with New Magnesium Alloys (A. Dietz, G. Klumpp).
Post Processing.
Effects of Strain Rate and Filler Alloy on the Properties of Laser Welded AZ31 Alloy Sheet (Y. Durandet, W. Song, M. Brandt, P. Cordini, A. Ostendorf).
Microstructure Features of Hot Rolled AZ31 Magnesium Alloy for Friction Stir Welding (L. Commin, J.-E. Masse, L. Barrallier, M. Dumont).
Rational Friction Welding of High Creep Resistance Magnesium Alloy (G. A. Pinheiro, C. G. Pankiewicz, J. Fernandez dos Santos, K. U. Kainer).
Development of Face Milling Process for Mg-hybrid (Mg-Al, Mg-sintered steel) Materials (P. Ozsváth, A. Szmejkál, J. Takács, M. Eidenhammer, F. Obermair).
Arc Brazing of Magnesium Alloy AZ31 with Steel (DX 53 Z) (G. Garg, J. Zschetzsche, E. Simmchen, M. Schaper, U. Fuessel, S. Pandey).
Electromagnetic Compression of Magnesium Tubes and Process-related Improvement of Wrought Alloys by Micro-alloying (V. Psyk, A. Brosius, M. Kleiner, C. Broer, M. Bosse, M. Schaper, Fr.-W. Bach).
Efficient and Ecological Machining of Magnesium Hybrid Parts (C. Sanz, E. Fuentes, F. Obermair, L. Muntada).
Experiences with the Machining of Magnesium (R. Schwerin, S. Joksch).
Magnesium Matrix Composites.
In Mould Heating of Continuous Carbon Fibre Preforms for Reinforced High Pressure Die Casting Magnesium Parts (C. Oberschelp, G. Klaus, A. Bührig-Polaczek, J. Werner, A. Langkamp, W. Hufenbach, N. Hort, H. Dieringa, K. Kainer).
Mechanical Behaviour of an Mg-8Li Alloy Reinforced With Sic Particles (Z. Száraz, Z. Trojanová).
Production of AZ91D/CNF by Compocasting/Ultrasonic Agitation Conjugated Process (R. G. da Silveira Mussi, T. Motegi , F. Tanabe, H. Kawamura, K. Anzai, D. Shiba, M. Suganuma).
Thresholds in Creep Behaviour of Magnesium Alloy Matrix Composites with Short Alumina Fibres (K. Milička, F. Dobeš).
Anisotropy of Dilatation Characteristics in Mg and Mg4Li Fibre Composites (A. Rudajevová, P. Lukáč).
Magnesium-Hydroxyapatite Composites as an Approach to Degradable Biomaterials (F. Witte, J. Fischer, P. Maier, C. Blawert, M. Störmer, N. Hort).
AM-lite®: an Innovative New Alloy Opens Fresh Opportunities for Magnesium Applications (C. Kettler, T. Abbott, M. Murray, G. Dunlop, G. Stoesser, T. Fuest).
Aluminum Bolts in Magnesium Engine Components (I. Bertilsson, Zheng Tan, F. Bergman, A. Fischersworring-Bunk, M. Kunst, J. Thiele, T. Marx).
Experimental Warm Hydroforming System for Mg AZ31 Alloy Sheet Using a Low Melting Point Alloy as Forming Medium (M. Steffensen, J. Danckert).
Magnesium with Magnetic Properties for Sensory Use (Fr.-W. Bach, M. Schaper, M. Rodman, M. Nowak).
Research Programs.
The MagForge Project: European Community Research on Forging of Magnesium Alloys (W.H. Sillekens, D. Letzig).
Reports of the Priority Programme 1168 of the Deutsche Forschungsgemeinschaft (German Research counsil) InnoMagTec.
Detecting the Solid Fraction of Commercial Mg Alloys by Heat-Transfer Modeling: Comparison of DTA and DSC Experimental Basis Data (D. Mirković, R. Schmid-Fetzer).
Thermodynamic Simulation of Blending Mg-Alloys by Thixomolding (A. KozlovFetzer, M. B. Djurdjevic, R. Schmid-Fetzer).
Quantitative Understanding and Modeling of Microstructural Formation by Solidification Technique of Magnesium Alloys (G. Klaus, B. Böttger, J. Eiken, A. Bührig-Polaczek, I. Steinbach, M. Ohno, J. Gröbner, R. Schmid-Fetzer).
Production of a Fine-grained Mg Alloy AZ31 with SiC Particles (G. Vidrich, Y. Estrin, A. Schiffl, F. Pravdic, H. Kaufmann, H. Ferkel, N. Hort).
Grain Refinement of AZ31 by (SiC)P: Theoretical Calculation and Experiment (R. Günther, Ch. Hartig, R. Bormann).
Creep Resistance of Highly Calcium-alloyed AZ91 (D. Amberger, M. Göken, P. Eisenlohr).
Experimental and Numerical Investigation of Texture Development During Hot Rolling of Magnesium Alloys (R. Kawalla, C. Schmidt, H. Riedel, A. Prakash).
The Influence of Calcium and Cerium Mischmetal on the Deformation Behavior of Mg-3Al-1Zn (T. Laser, Ch. Hartig, R. Bormann, M. R. Nürnberg, D. Letzig).
Corrosion Fatigue Behaviour of Newly Developed Mg Wrought Alloys (C. Fleck, A. Schildknecht, K.A. Weidenmann, A. Wanner, D. Löhe).
Comparison of Dieless Clinching and Dieless Rivet Clinching of Magnesium (R. Neugebauer, S. Dietrich, C. Kraus).
Influence of Cutting and Non-Cutting Processes on the Corrosion Behavior and the Mechanical Properties of Magnesium Alloys (F.-W. Bach, B. Denkena, P. Alpers, M. Bosse, K. Weinert, N. Hammer).
Development of Innovative Technologies for Joining Magnesium Alloys and Dissimilar Materials Related to Components (S. Mücklich, B. Wielage, M. Horstmann, O. Hahn).
Monotonic Properties and Cyclic Deformation Behavior of Friction Stir Welded Mg/Mg-, Mg/Al- And Al/Al-Joints (G. Wagner, M. Gutensohn, D. Eifler).
Author Index.
Subject Index.

Library of Congress subject headings for this publication:
Magnesium alloys -- Congresses.